Elegant and ergonomic, from expansive to compact, these versatile workstations are ideal for audio/video editing and music production.

Among our wide array of keyboard composing, mixing and editing workstations, you're sure to find the right one for you.

Our unique, ergonomic and highly intuitive multi-level mixing environments are designed to provide beautiful and functional mixer-specific console housings for all the popular mixers. Or you may choose the versatile alternative of our generic mixing consoles, designed to provide the optimum flexibility to house any of today's popular mixing boards in the widest range of possible configurations.
 

We have developed three differing approaches to Mixing Console Housings.
 

Synergy - these stylish workstations take their cue from traditional console design. They typically feature a padded wrist rest in front, console supported at comfortable height and angle for extended session work, rack bays on either side of the console and a removable back in the rear. There is a one piece "monitor bridge" for video and near-field monitors.

1. Mixer Specific Synergy Console Housings - this group is built around specific mixers in a variety of configurations. Dependent upon the mixer's geometry and dimensions, we adapt our design to maximize gear placement and ergonomics.
2. Generic Synergy Consoles - in response to calls for a flexible system, we developed the Synergy 600, 800 and 1000 models. Each of these Synergy consoles feature a base model which consists of a framework plus one rack bay mounted on the right side. This framework is then customized to fix specific mixers by means of filler kits consisting of combinations of additional rack bays, work surfaces and filler strips plus blocks to adapt the mixers to the pre-determined angles of the base console. Over the years we have developed well over 100 different kits.
3. Solid Sides vs XL legs: We offer most Synergy Models with your choice of Melamine Sides or Black Powder Coated Steel Legs.
4. Please be sure to refer to schematics to verify maximum gear dimensions allowable in the rack bays as these differ model by model.

MixStation - We designed the MixStation series in response to calls for mixing workstations which are capable of housing lots of rack gear. MixStations with few exceptions all share the following features:

Two rack cabinets flank a central desk for the mixing console. Cabinets have 10 rack spaces below with a work surface in front of 5 sloping spaces at console height. There are an additional 6 vertical spaces topped by a solid monitor shelf. Cabinets are open in the rear.

1. Wrist rest only in front of the console.
2. Behind the console is a monitor shelf whose height and width is determined by the dimensions of the mixing console.
3. Can accept our fully articulating computer keyboard shelf and slide (for most MixStation models this is KMS4)
4. The entire workstation is on casters so that it may be rolled away from a wall to access wiring.

Generic - This category includes the wide range of products that have a desk surface large enough to support a mixing console, control surface or combination of the two.

1. Included among the most popular are the entire Force Series, the versatile ProStation M/C, and the Coda Series.
2. This range of products features both above and below desk height rack bays, monitors bridges and options for computer keyboard/mouse shelves. Most are on casters for ease of access to wiring.

The Force Series is an elegant, expansive and ergonomic group of workstations ideal for music production and audio/video editing.

Mixstation Series

We designed the MixStation series in response to calls for mixing workstations which are capable of housing lots of rack gear. MixStations with few exceptions all share the following features:

1. Two rack cabinets flank a central desk for the mixing console. Cabinets have 10 rack spaces below with a work surface in front of 5 sloping spaces at console height. There are an additional 6 vertical spaces topped by a solid monitor shelf. Cabinets are open in the rear.
2. Wrist rest only in front of the console.
3. Behind the console is a monitor shelf whose height and width is determined by the dimensions of the mixing console.
4. Can accept our fully articulating computer keyboard shelf and slide (for most MixStation models this is KMS4)
5. The entire workstation is on casters so that it may be rolled away from a wall to access wiring.

Synergy Series

These stylish workstations take their cue from traditional console design. They typically feature a padded wrist rest in front, console supported at comfortable height and angle for extended session work, rack bays on either side of the console and a removable back in the rear. There is a one piece "monitor bridge" for video and near-field monitors.

1. Mixer Specific Synergy Console Housings - this group is built around specific mixers in a variety of configurations. Dependent upon the mixer's geometry and dimensions, we adapt our design to maximize gear placement and ergonomics.
2. Generic Synergy Consoles - in response to calls for a flexible system, we developed the Synergy 600, 800 and 1000 models. Each of these Synergy consoles feature a base model which consists of a framework plus one rack bay mounted on the right side. This framework is then customized to fix specific mixers by means of filler kits consisting of combinations of additional rack bays, work surfaces and filler strips plus blocks to adapt the mixers to the pre-determined angles of the base console. Over the years we have developed well over 100 different kits.
3. Solid Sides vs XL legs: We offer most Synergy Models with your choice of Melamine Sides or Black Powder Coated Steel Legs.
4. Please be sure to refer to schematics to verify maximum gear dimensions allowable in the rack bays as these differ model by model.

The classic ProStation Series comprises four multi-purpose workstations designed to create the perfect environment for a multitude of music and audio/video applications.

The CODA Series is distinguished by its bold, innovative design, providing a compact, ergonomic environment for digital mixing and editing.

Our multi-functional assortment of Compact Workstations is designed to meet a variety of needs in a space-saving, ergonomic and economical fashion.

Racks, racks & more racks.

If one of our production models is not quite right for your specific application, Omnirax can make it right!

Many projects that appear to be custom in nature simply require minor modifications to our existing product line. We call these projects "Semi-Custom."

We routinely perform "Semi-Custom" modifications to all existing models for a modest charge. Very often these slight alterations are all that is needed to create a personalized studio environment that would otherwise be prohibitively expensive.

In addition to our "Semi-Custom" service, Omnirax has full Custom capability, from design to production. We recognize that novel applications are always arising. Years of experience have enhanced our capacity to tackle complex custom projects with in-house consultation, design, and fabrication to exact specifications. We are custom specialists and invite your inquiries. We are eager to work with you.